Choosing a PCB manufacturer in the USA starts with a question most lists skip: which plant will fabricate the bare board? A US sales office, an assembly line and a fabrication site are different things, and the difference matters when a contract requires domestic origin or a prototype is needed quickly.

This guide shortlists ten companies with published PCB capabilities and a named US manufacturing site. They are grouped by buyer scenario (prototype, specialty, high-reliability and multi-site production) and ordered alphabetically within each group. The list is a research-based shortlist, not a revenue ranking or a factory audit.

Key Takeaways

  • Confirm the fabrication site, not the sales office or the assembly line.
  • The ten entries are grouped by buyer fit, not ranked by revenue or quality.
  • “US-made” can mean fabricated, assembled or US-owned; each claim needs different evidence.
  • Compare quotes on the same files, stackup, tests and delivery terms.

US PCB manufacturers at a glance

The ten companies, in the order used below:

  1. AdvancedPCB
  2. Bay Area Circuits
  3. Sierra Circuits
  4. All Flex Solutions
  5. Calumet Electronics
  6. Epec Engineered Technologies
  7. Green Circuits
  8. Sanmina
  9. Summit Interconnect
  10. TTM Technologies
Geographic map of verified US PCB manufacturing facilities and fabrication plants in 2026
Figure: Geographic distribution of 10 verified US PCB fabricators, highlighting the California quick-turn cluster, Midwest defense corridor, and Northeast specialty engineering hubs.

As illustrated in the map above, domestic bare-board fabrication in the United States is heavily concentrated in specific regional clusters rather than distributed evenly:

  • California (Silicon Valley & SoCal): The nation’s densest quick-turn and prototyping corridor, dominated by HDI, rigid-flex, and ITAR prototype specialists like Sierra Circuits, Bay Area Circuits, and regional plants of Summit and AdvancedPCB.
  • Midwest Defense & Reliability Corridor (MI, WI, MN, IL): The epicenter for harsh-environment, aerospace, and defense-certified manufacturing—featuring Calumet Electronics in Michigan, TTM’s facilities in Wisconsin, and All Flex in Minnesota.
  • Northeast & Mountain Nodes (MA, CT, NY, CO, AZ): Specialized in custom engineered builds (Epec in MA), advanced RF and substrate plants (TTM in CT and Syracuse, NY), and multi-site production facilities across Colorado and Arizona.

The table separates the US site each company publishes from the capability it claims. The final column lists what the quotation still has to confirm. A published product range does not prove that every plant makes every construction.

ManufacturerTypePublished US site(s)Stated focusBest fitConfirm before quoting
AdvancedPCBMulti-site fabricatorAurora, CO; Santa Clara, Anaheim and Placentia, CA; Chandler, AZ; Maple Grove, MNPrototypes through production; CMMC, ISO 9001, MIL-PRF-31032 and ITAR listedPrototype-to-production programsAssigned plant and qualification scope
Bay Area CircuitsPrototype fabricatorFremont, CADesign, fabrication and assembly in a 30,000 sq ft facilitySilicon Valley prototypesIn-house fabrication versus sourcing
Sierra CircuitsAdvanced prototype fabricatorSunnyvale and San Jose, CAHDI, blind and buried vias, flex and rigid-flex, Class 3Dense or Class 3 prototypesSite assignment and Class 3 records
All Flex SolutionsFlex specialistMinnesota facilities; Milpitas, CACustom flexible circuits and heatersFlex and heater projectsFacility and material options
Calumet ElectronicsHigh-reliability fabricatorCalumet, MIHigh-reliability PCBs; ITAR, HUBZone and DoD-ready positioningDefense and aerospaceProgram qualification and capacity
Epec Engineered TechnologiesEngineered PCB supplierNew Bedford, MACustom PCBs, flex and rigid-flexHigh-mix engineering workIn-house versus sourced steps
Green CircuitsFabrication and assemblySan Jose, CAPCB fabrication and assembly; ISO 9001 and AS9100D listedAerospace and turnkey buildsBare-board versus assembly split
SanminaPCB and EMSSan Jose, CA PCB technology centerPCB services, backplanes and PCB assemblyComplex multi-stage programsSite-specific technology limits
Summit InterconnectMulti-site fabricatorIrvine, Anaheim, Santa Clara and Hollister, CA; Aurora, CO; ChicagoPCB manufacturing and quick-turn prototypesMulti-site or second-source programsCapability at the assigned site
TTM TechnologiesPCB and RF manufacturerChippewa Falls and Eau Claire, WI; Stafford and Stafford Springs, CT; Santa Ana, CAConventional, HDI, flex and rigid-flex, RF/microwave, thermal managementRF and high-reliability programsAssigned plant and line qualifications

Sources for each row are linked in the profile below; all were checked in November 2026. The table lists published sites, not audited capacity.

How this shortlist was selected

To separate genuine US fabrication plants from sales offices, brokers, and pure assembly lines, we established three strict inclusion criteria for this 2026 guide:

  • Verified Physical US Plant: Each company must operate at least one physical manufacturing facility in the United States where bare-board fabrication or advanced PCB processing actually occurs—not merely a domestic sales office or corporate headquarters.
  • Published Technical Capabilities: Inclusion required publicly documented manufacturing specs (e.g., layer counts, HDI/microvia tolerances, RF materials, or Mil-Spec/ITAR registrations) linked to their operational footprint.
  • Clear Sourcing Distinctions: For suppliers offering both domestic and overseas production, we verified that a domestic-build pathway is explicitly supported.

Methodology & Scope Boundaries

  • Independent Desk Research: All facility listings, certifications, and SEC filings (such as TTM Technologies’ latest 10-K) were verified as of November 2026.
  • Not a Paid Scorecard: This guide is grouped by buyer scenario (prototype, specialty, defense, multi-site) and listed alphabetically within each category. We did not perform physical factory audits, benchmark custom pricing, or rank companies by revenue.
  • M&A Consolidation Check: Because the US PCB industry experiences frequent mergers and acquisitions, brand names were consolidated based on active web domains. For example, APCT’s domain (apct.com) redirected directly to AdvancedPCB upon verification, so it was treated as part of AdvancedPCB’s multi-site network rather than a separate entry.

Ten PCB manufacturers with US fabrication sites

The profiles follow the table order: prototype-focused fabricators first, then specialty and high-reliability suppliers, then multi-site and RF manufacturers. Inclusion reflects published evidence, not a claim that one company is better than another.

AdvancedPCB

ITAR Registered MIL-PRF-31032 ISO 9001:2015 Multi-Site Network Quick-Turn to Production

AdvancedPCB is a multi-site US fabricator with a facility network that includes Aurora, Colorado; Santa Clara, Anaheim and Placentia, California; Chandler, Arizona; and Maple Grove, Minnesota (AdvancedPCB facility list, capability selector, checked November 2026). It lists CMMC, ISO 9001:2015, MIL-PRF-31032 and ITAR registration, and it sells quick-turn prototypes alongside production boards.

A practical first call for a prototype that may move into production, because the same company publishes a path from prototype to deployment. The quotation should name the assigned plant, the qualification scope behind the MIL-PRF-31032 listing, and whether the quick-turn terms apply to your layer count and surface finish. A multi-site network helps only if the site that quotes your board is the site that builds it.

Bay Area Circuits

Silicon Valley Prototype Fab & Assembly Under One Roof 30k sq ft Facility

Bay Area Circuits runs a 30,000 square foot facility in the Fremont Innovation District and describes design, fabrication and assembly from that site (Bay Area Circuits, checked November 2026). A Silicon Valley team that wants a local prototype fabricator and one partner for assembly is the fit.

Ask whether the bare board is fabricated in Fremont or sourced, the layer count and materials the facility supports, and how assembly handoff and test are quoted. A 30,000 square foot plant suits prototypes and small production; it is not evidence of capacity for a large volume program.

Sierra Circuits

IPC Class 3 Certified Mil-Spec Ready HDI & Microvia Rigid-Flex Sunnyvale & San Jose Plants

Sierra Circuits lists 1108 West Evelyn Avenue, Sunnyvale, California, as its address, and its facility tour covers plants in Sunnyvale and San Jose (Sierra Circuits facility tour, checked November 2026). Its published range includes HDI, blind and buried vias, flex and rigid-flex boards, and Mil-Spec/Class 3 work (Sierra Circuits, checked November 2026).

An advanced prototype where feature density or Class 3 acceptance is the constraint is the fit. The build plan should name the site, state whether the quoted stackup is produced in-house, and show how Class 3 inspection and test will be documented.

All Flex Solutions

Flex Circuit Specialist Flexible Heaters Minnesota Plants & Milpitas CA

All Flex Solutions reports three US facilities, all based in Minnesota, and its site also lists a Milpitas, California address; the company makes custom flexible circuits and heaters (All Flex Solutions, checked November 2026). The specialist entry for a design that needs a flex circuit rather than a rigid board.

A first flex order should establish which facility will run the design, the material and coverlay options, the stiffener and assembly approach, and whether the advertised quick-turn capacity applies to your quantity. A specialist is often a better fit than a general fabricator for a first flex build.

Calumet Electronics

DoD-Ready (100% US Domestic) ITAR Registered HUBZone Certified 200k sq ft Campus (MI)

Calumet Electronics manufactures high-reliability PCBs at its Calumet, Michigan campus, where it lists a 200,000 square foot factory floor, ITAR registration, HUBZone certification and DoD-ready positioning (Calumet Electronics, checked November 2026). Defense, aerospace and other programs where traceability and domestic origin matter more than a consumer-grade price are the fit.

Program qualification is the first question: which qualifications and certificate scope apply, which stackups and materials the plant accepts, and what capacity is available at your volume. “DoD-ready” is a positioning statement, not a substitute for the specific qualification your contract requires.

Epec Engineered Technologies

High-Mix Custom PCBs Rigid-Flex & Heaters Aerospace & Medical Focus New Bedford, MA HQ

Epec Engineered Technologies is based in New Bedford, Massachusetts, and describes custom printed circuit boards plus flex and rigid-flex solutions for aerospace, medical, industrial and defense applications (Epec overview, Epec, checked November 2026). A high-mix project that needs engineering support and a US point of contact rather than a catalogue part is the fit.

The split between in-house and sourced steps is the main issue. Ask which fabrication steps are performed in New Bedford and which come from partner plants, and request the certificate scope of the legal entity that will quote. “Engineered” can mean design support, sourcing or in-house fabrication; the quote should make the split explicit.

Green Circuits

AS9100D Certified ISO 9001:2015 Turnkey Fabrication & Assembly San Jose, CA Facility

Green Circuits operates a 60,000 square foot manufacturing facility in San Jose, California, and describes PCB fabrication and assembly backed by more than 30 years of experience; its site lists ISO 9001 and AS9100D registration (Green Circuits, checked November 2026). A buyer who wants fabrication and assembly coordinated by one supplier, particularly for aerospace work, is the fit.

One risk is that a combined quote hides which site made the board. Ask whether the bare board is fabricated in-house or sourced, the AS9100D scope, and the inspection and test plan included. Combining fabrication and PCB assembly can simplify logistics, but ask for both locations in writing.

Sanmina

Tier-1 Global EMS Complex Multi-Layer & Backplanes Signal Integrity Analysis San Jose PCB Tech Center

Sanmina’s PCB technology page lists San Jose, California, as its US printed-circuit-board location and describes complete PCB services there, from process development and signal-integrity analysis to quick-turn prototyping and in-house laminate qualification (Sanmina PCB locations, checked November 2026). The corporate headquarters is also in San Jose (Sanmina, checked November 2026).

A complex program that needs PCB fabrication, backplanes and assembly under one supplier is the fit. The plant page describes PCB services; it does not list every layer count or material, so the quote should name the San Jose site, the site-specific technology limits and the handoff to assembly. For a first article, ask for inspection records and change-control at that plant, not the group’s general capability page.

Summit Interconnect

8 North American Sites 5-Day Quick-Turn Rigid, Flex & Rigid-Flex ITAR Multi-Site Network

Summit Interconnect reports seven connected facilities and eight North American locations, including sites in Irvine, Anaheim, Santa Clara and Hollister, California; Aurora, Colorado; Chicago; and Toronto (Summit Interconnect, checked November 2026). It has assembled the network through acquisitions, including a quick-turn prototype specialist, and advertises small to mid-quantity PCB orders in five days or faster.

A group network is useful only when the assigned site can build the stackup. Ask which facility will run the job, what technology each site supports, and how engineering changes move between sites. Combined group capability is not the same as the capability of the plant that receives your files.

TTM Technologies

Publicly Traded (SEC 10-K) RF & Microwave Leader New Syracuse Plant (Ultra-HDI) Defense, Space & Radar Qualified

TTM Technologies is a US PCB and RF manufacturer. Its latest annual report lists US manufacturing sites including Chippewa Falls and Eau Claire, Wisconsin; Stafford and Stafford Springs, Connecticut; and Santa Ana, California, where its principal offices are based (TTM 2025 annual report, checked November 2026). The company also reports a new advanced PCB plant in Syracuse, New York, where construction is complete and equipment installation and testing are underway.

TTM’s published range covers conventional, HDI, flex and rigid-flex, RF/microwave and thermal-management boards, plus microelectronics for aerospace, space and defense (TTM Technologies, checked November 2026). RF, defense and other high-reliability programs where board technology is the constraint are the fit. The annual report lists sites and square footage, not the capability of each line, so the quote still needs to name the plant and confirm the construction is qualified there.

How to choose a US PCB manufacturer

Start with the buyer scenario, not the company logo. The questions below change the shortlist more than a generic list of certifications.

Buyer scenarioWhat matters mostQuestions that change the answer
Defense and aerospaceITAR, DFARS and traceabilityWhich entity holds the registration? What is the certificate scope? Who subcontracts what?
Rapid prototypeCycle time and DFM feedbackWhen does the lead time start? Which plant builds it? What is excluded from the quick-turn promise?
Production volumeCapacity, yield and change controlWhat capacity is committed? What triggers a process change notice?
Flex and rigid-flexMaterial and stackup experienceHas the site built a similar construction? Which stiffener and coverlay options are available?
HDI and RFFeature density and impedance controlWhat are the site’s minimum line/space and via-fill limits? How is impedance verified?
Turnkey assemblyComponent sourcing and testWho controls the BOM and AVL? What inspection and functional test are included?

Send every supplier the same board files, quantity, stackup, acceptance criteria and delivery point. Ask each company to name the fabrication site in the written quote and to state whether any step is subcontracted. A US sales office can quote a board made elsewhere, and a low price can exclude test scope you need. For the complete audit, including change control and records, see our PCB supplier qualification checklist.

What “US-made” means for a PCB

Three different claims

  • Fabricated in the USA: the bare board is produced at a US plant.
  • Assembled in the USA: components are mounted at a US site, even if the bare board was imported.
  • US-owned: the supplier is American-owned; ownership says nothing about where the board is made.

A board assembled in California from imported bare boards is not a US-fabricated board. A US-owned supplier may fabricate in Asia. Ask which claim the supplier is making, then ask for evidence that matches it.

Useful evidence includes the fabrication site named in the quote, the certificate holder and scope, ITAR registration where applicable, country-of-origin documentation, a subcontractor list, and a site visit or audit for critical programs. A certificate issued to a parent company does not automatically cover every plant or process.

How can I verify where my PCB is made?

Ask for the fabrication site in the written quote, the certificate holder and scope, a subcontractor list and country-of-origin documents. Compare them with the supplier’s public claims, then visit or audit the plant for critical programs. A site visit is the strongest check; a certificate alone is not.

Defense and federally funded work can add clauses under the Buy American Act (FAR Part 25), DFARS or ITAR. These are contract-specific. A US address does not establish compliance, and a certificate does not cover every facility or process. Confirm the applicable clauses with your compliance team before relying on a supplier’s marketing.

USA vs China PCB manufacturing

Compare the same design, quantity and acceptance criteria. The usual trade-offs are domestic premium versus landed cost, transit and customs, engineering time zones, quote currency and change control. For defense or federally funded programs, origin requirements may decide the question before price does. For commercial hardware, a China-based fabricator can be cost-effective, but the buyer still has to plan for transit, duties and supplier qualification.

🇺🇸

When to Choose a US Fabricator

Best suited for defense mandates, ultra-fast local turnaround, or on-site engineering collaboration.

  • 🛡️ Strict Legal Compliance: Required for ITAR, DFARS, DoD, or Buy American Act contracts.
  • ⚡ Emergency Prototyping: 24–48 hour quick-turn bare-board delivery within the continental US.
  • 🤝 On-Site Collaboration: Complex R&D requiring hands-on factory audits or physical process reviews.
  • 📐 Class 3 Defense / Space: Mission-critical mil-spec builds requiring domestic lot traceability.
Trade-off: Higher unit cost (domestic premium) and limited commercial high-volume capacity.
Best Commercial ROI
🌏

When to Choose LEADHUI (Offshore)

Ideal for commercial hardware, scalable volume, and budget-optimized turnkey PCBA programs.

  • 💰 Cost Optimization: 40%–60% landed cost reduction on mid-to-high volume production runs.
  • 📱 Commercial Products: Industrial IoT, medical devices, automotive, and consumer electronics.
  • 🔄 Full Turnkey Assembly: Seamless SMT assembly, active component sourcing, and box-build testing.
  • 🚀 Scalable Capacity: From 10-piece pilot runs to 100,000+ unit mass production without plant hopping.

LEADHUI PCB manufactures in China and ships to North America. It is not one of the ten US entries above. If your program can use an offshore source, LEADHUI PCB’s fabrication service provides a route to compare; if your contract requires US fabrication, use the shortlist and verify the plant.

Frequently asked questions

Who is the largest PCB manufacturer in the US?

Revenue is one common measure. TTM Technologies reports its revenue in its annual report; check the latest 10-K for the current figure and fiscal year (TTM 2025 annual report). Revenue rank does not show which supplier fits your board, volume or qualification requirements.

Where are most PCB manufacturing plants located in the US?

Geographically, US PCB fabrication is heavily clustered in two major zones:

  1. California (Silicon Valley and Orange County): Best suited for rapid prototyping, tight-tolerance HDI, and engineering-driven turnaround.
  2. The Midwest (Michigan, Wisconsin, Minnesota, and Illinois): Centered on high-reliability, defense/aerospace, and MIL-PRF qualified volume production.

Specialized RF and advanced substrate facilities are also situated across the Northeast (New York, Massachusetts, and Connecticut). See our facility map above for the exact plant breakdown.

Do I need a US manufacturer for defense work?

It depends on the contract. ITAR, DFARS and Buy American provisions can apply differently, and a US address alone does not prove compliance. Ask for the registration, certificate scope and origin evidence that match your program, and confirm the applicable clauses with your compliance team.

Are US PCB manufacturers more expensive?

Often there is a domestic premium, but the gap depends on quantity, stackup, testing, lead-time definition and total landed cost. Compare quotes on identical files and acceptance criteria; a US quick-turn prototype and an offshore volume order are not comparable purchases.

How current is this list?

The company pages and filings were checked on November 2026. Facilities, ownership and certifications change, so confirm the assigned plant and current certificate before you place an order.

About this guide

This guide was researched and published by LEADHUI PCB, a PCB fabrication and assembly manufacturer. It is desk research based on public company pages and filings; it does not claim factory visits or independent testing. For corrections or questions, contact LEADHUI PCB.

Request a PCB quotation

If your program is open to China-based production, send the stackup, layer count, quantity, surface finish, acceptance criteria, destination and required delivery date to LEADHUI PCB for a project-specific quote. The company manufactures in China and ships to North America; it is not one of the ten US entries above. Request a PCB fabrication quote or discuss PCB assembly.